|
Subject: SPROUL 8 January 2008 - Chavez REVISION #1
+REVISIONS 12/30/07 Date change, S/N change
******************** STS/ODF-/SEG EQUIPMENT REQUEST ****01SPchavez*****
PI/REQUESTOR: Chavez, Gabriela
Institution: Scripps Institution of Oceanography
Address: 9500 Gilman Drive
La Jolla, CA 92093-0208
Phone: 858-534-4986 Fax: 858-534-9820 Email: gchavez@ucsd.edu
SHIP: SPROUL STS/SEG/ODF POC: John Calderwood
DATES: 08 January 2008 - 08 January 2008
Uwe Send, usend@ucsd.edu
__________________________________________________________________________
STS/ODF-/RT PERSONNEL REQUIRED: No: 1; 0 ODF; 0 SEG; 1 ResTech
__________________________________________________________________________
Casts: 5 casts: 2 test casts, 2 installation casts with
water samples (8 samples per cast) and 1 post-deployment cast.
Ocean bottom should be anywhere from 120 to 150 meters.
Equipment Required:
CTD SBE system with acquisition computer, Sea-Bird programs:
Sea-Bird SEASAVE for Windows
Sea-Bird Data Processing programs Windows based.
Sea-Bird Data Processing Manual
Sea-Bird Data Acquisition Manual
Current calibrations entered into the *.con file.
Calibration sheets, copy, and pdf files
Computer with keyboard/mouse/color monitor IBM
1 each CTD, Sea-Bird 911plus 09P21561-0569
w/Pressure sensor 401K-105 75672
3 each Temperature Sensor, Sea-Bird SBE3Plus 32165
Temperature Sensor, Sea-Bird SBE3Plus 34308
Temperature Sensor, Sea-Bird SBE3Plus 34476
3 each Conductivity Sensor, Sea-Bird SBE4C 42319
Conductivity Sensor, Sea-Bird SBE4C 42818
Conductivity Sensor, Sea-Bird SBE4C 43023
3 each Pump, Sea-Bird SBE5T 51758 (Spare)
Pump, Sea-Bird SBE5T 53376
Pump, Sea-Bird SBE5T 54128
1 each Fluorometer, SeaTech 91S
1 each Oxygen sensor, Sea-Bird SBE43 430275
1 each Deck Unit, Sea-Bird, V.2 SBE11 11878
1 each Altimeter,Benthos 916D 1055
1 each Carousel, Sea-Bird Pylon 12-place SBE32 3234939-0487
ROSETTE:
1 each 12 place rosette frame, yellow
Lead weights & hardware for rosette
Nitrile (Buna-n) o-rings are installed on the bottles.
NOTE: Suspect silicone o-rings are necessary.
PI will also require a freezer for chlorophyll samples-contact restech@ucsd.edu
Water samples for salinity, oxygen, nutrients and chlorophyll
FORMS: CTD Station sheets
NOTE-SENT MESSAGE ASKING IF THIS WAS TO BE INSTALLED ON CTD:
We only need NO3 so that we can calibrate our nutrient sensor.
NOT REQUESTED:
1 each WetLabs transmissometer, 25cm CStar CST-556DR
SHORE ANALYSIS-INDEX NUMBER NOAUSCT:
8-16 each Oxygen
8-16 each Salinity
4 each Nutrients, only need NO3 to check their nutrient sensor
We're trying to coordinate some water samples on Sean Wiggins' cruise for
December 10-13.
It would only be one cast with water samples, same scheme as above.
No nutrients.
__________________________________________________________________________
Additional Information:
SEE: http://shipsked.ucsd.edu
Shipping Details (Approx.Dates,etc.): N/A
All equipment is to be returned clean and assembled.
Overboard equipment must be rinsed with fresh water and dried.
__________________________________________________________________________
Taken by: email Request by: K. Sanborn 20 November 2007
Copies to: Sutherland/Ayers/Durkin/Files(Administration);
Oceanographic Data Facility (all-at-odf@odf.ucsd.edu);
Swift; ODF participants; Requestor/PI
Shipboard Electronics Group (all-at-seg@odf.ucsd.edu);
Research Technicians (restech@ucsd.edu);
Ship Scheduling (shipsked@ucsd.edu);
Sproul Captain (master@rv-sproul.ucsd.edu);
Captain Althouse (talthouse@ucsd.edu)
All other requests should be directed to Reseach Technicians.
** Notify John Calderwood or Kristin Sanborn of additions or changes.
email: ksanborn@ucsd.edu Telephone: (858) 534-1903
jcalderwood@ucsd.edu (858) 534-1907 |
